Product Categories

Contact Us

Huichi Industrial Development Co.,Ltd

Add:2nd Likang Industrial Zone, Shitan Road, Shijing, Biayun District, 510430 Guangzhou China

Contact us:

Chris:+86-13922459592   chris@huichiglass.com

Mukial:+86-18922173106   mukial@huichiglass.com

Tel:+86-20-36499996     Fax:+86-20-36492206

Web Site:www.huichipdlc.com, www.huichiglass.com

About glass

Home > About glass > Content
Antireflective glass AG GLASS
Apr 28, 2017

Now the frequency of human exposure to electronic devices is getting higher and higher, life, 

we are more or less glare attack experience, some from the glare light source, some from the glare 

of the reflection; we often in the operation of the computer outside the monitor Of the scene in the 

display surface of the reflection and can not see the contents of the show and worry; these are due to 

glass surface caused by light reflection, because the ordinary glass has a high reflectivity. To reduce

 the impact of glass reflected light, the glass surface to light (anti-reflective) treatment can play a good 

effect. Ordinary glass in the visible range, its unilateral reflectivity of about 4%. The total spectral

 reflectance of about 8%. Glass surface in the visible light within the anti-reflective effect can be

 achieved through two ways: one for the use of The interference effect produced by the different

 optical material film layers is used to eliminate the incident light and the reflected light, thereby

 increasing the transmittance method. The glass produced by the phase interference interference of

 light is called AR glass; the other method is to use the rough surface Of the scattering effect of a large 

number of incident light into diffuse light, it will not bring a significant change in transmittance, 

which is produced by the fine coarsening glass known as AG glass.


Anti-Glare Glass (Anti-Glare Glass), also known as non-reflective glass, glass products through 

special chemical chemical etching process processing, can be one or both sides. Which is 

characterized by the original glass reflective surface into matte diffuse reflective surface. 

Can reflect the reflection of fuzzy, to prevent glare but also to reflect the decline in brightness, 

reduce light and shadow, anti-glare products, surface corrosion, anti-scratch performance. 

Combined with video imaging screen can constitute a transparent anti-glare, anti-reflective screen, 

to solve the electronic screen, video screen in the ambient light source to produce reflective,

 glare problems, improve image quality. This effect is constant at large viewing angles, providing 

a uniform flat and light-dispersible surface for high-resolution use scenes. AG anti-glare glass 

that is not reflective glass can be scattered reflected light, allowing users to concentrate on the

 transmission of the screen. Reflective glass has several qualities and etch levels. From the frame 

quality to the display quality, the gloss value is 35 to 110. The lower the Gloss value, the more 

dispersed the light on the glass surface. The more dispersed the surface light, the user can see

 less glare, but the dispersion of the light source and the resolution of the panel is inversely 

proportional to the relationship



AR high anti-reflection glass (Anti-reflection

Also known as increasing the amount of glass or anti - reflective glass. AR glass is an optical 

coating on one or both sides of the glass to reduce emissivity and thus improve the transmittance

 of light, reduce surface glare and increase the transmittance and brightness of the substrate while

 reducing the surface reflectivity of a particular light wave Better contrast clarity. So that it has a

 lower reflectivity than ordinary glass, so that the light reflectivity reduced to below 1%, in the glass 

surface of the AR coating can make ghosting and multiple reflections to minimize and may eliminate. 

AR coating can be single or multi-layer, the standard broadband AR can be the surface of the 

reflectivity from 4% to 0.5%