Product Categories

Contact Us

Huichi Industrial Development Co.,Ltd

Add:2nd Likang Industrial Zone, Shitan Road, Shijing, Biayun District, 510430 Guangzhou China

Contact us:

Chris:+86-13922459592   chris@huichiglass.com

Mukial:+86-18922173106   mukial@huichiglass.com

Tel:+86-20-36499996     Fax:+86-20-36492206

Web Site:www.huichipdlc.com, www.huichiglass.com

About glass

Home > About glass > Content
The type of glasses
Apr 11, 2017

1 ordinary flat glass


   Ordinary flat glass is also called window glass. Flat glass with light transmission, insulation,

 sound insulation, wear resistance, weather resistance, and some insulation, heat absorption, 

radiation and other characteristics, which is widely used in mosaic buildings doors and windows, 

walls, indoor Decoration and so on. Flat glass specifications are usually divided into thickness 2mm, 

3mm, 4mm, 5mm, and 6mm, also produced 8mm and 10mm. General 2mm, 3mm thick for civilian

 buildings, 4mm - 6mm for industrial and high - rise buildings. Factors affecting the quality of flat 

glass are mainly bubbles, stones and wave tendons. Bubbles are hidden in the vitreous cavity, is in

 the manufacturing process of the cooling stage of the accident caused by the accident. Stone is

 commonly known as pimple, also known as sand, is present in the glass of solid inclusions, which is 

the most dangerous defects in the glass body, it not only destroyed the appearance of glass products 

and optical uniformity, and will greatly reduce the mechanical strength of glass products And thermal 

stability, and even make the product itself to break. Good flat glass products should have the following

 characteristics: 1) is colorless or slightly pale green 2) the thickness of the glass should be uniform, 

the size should be standardized 3) no or no bubbles, stones and wave tendons, scratches and other 

defects The Users in the purchase of glass, you can first put the two glass flat together, so that each 

other coincide, opened to the time, if a lot of effort, then the glass is very flat to observe the glass in 

addition to any bubbles, stones And the ball tendons, scratches, etc., good quality of the glass from 

the 60 cm away, the backlight line of the naked eye, do not allow large or concentrated bubbles, 

do not allow missing or cracked, glass surface allows to see the ball, The maximum angle of the road

 should not exceed 45 degrees; scratch sand should be less good. Glass in the wet place long-term 

storage, the surface will form a layer of white shade, so that the transparency of the glass will be

 greatly reduced, the selection should be noted.



  2, hot-melt glass hot-melt glass, also known as crystal three-dimensional art glass, is currently 

beginning in the decoration industry in the new family. Hot-melt glass from Western countries, in 

recent years to enter our market. Previously, China's market are foreign products, and now the

domestic glass manufacturers have introduced foreign hot melt furnace production products.

 Hot-melt glass with its unique decorative effect as the design unit, glass processing owners, decoration and decoration owners focus. Hot-melt glass across the existing glass form, give full play to the designer and craftsman's artistic conception, the modern or classical art form into the glass, so that the processing of a variety of flat glass bumps, color different artistic effects The Hot-melt glass products are more, there are already hot-melt glass tiles, doors and windows with hot-melt glass, large wall embedded glass, cut off glass, one bathroom glass wash basin, finished mirror frame, glass art, etc. Unique glass material and artistic effect is very extensive. Hot-melt glass is a special hot-melting furnace, flat glass and inorganic pigments as the main raw material, set a specific heating process and annealing curve, heated to the glass softening point above the molding die by special molding after annealing, If necessary, and then carving, drilling, repair and other processes after processing.

 


3, laminated glass laminated glass, also known as laminated glass, is between the two pieces of glass 

into a layer of polyvinyl butyral as the main component of the pvb interlayer. Even if the glass

 fragmentation, debris will be sticky on the film, broken glass surface remains clean and smooth. 

This effectively prevents debris from tying and penetrating the occurrence of falling events, ensuring

 personal safety. In Europe and the United States, most of the architectural glass are used laminated 

glass, which not only to avoid injury accidents, but also because the laminated glass has excellent 

seismic invasion capability. The middle film can resist the hammer, chopper and other weapons of the

ntinuous attack, but also for a long time to resist the penetration of bullets, the degree of security can 

be described as extremely high. Modern living room, sound insulation is good, has become one of the

 important factors to measure the quality of housing.

Order processing. 3, laminated glass laminated glass, also known as laminated glass, is between the

 two pieces of glass into a layer of polyvinyl butyral as the main component of the pvb interlayer. 

Even if the glass fragmentation, debris will be sticky on the film, broken glass surface remains clean 

and smooth. This effectively prevents debris from tying and penetrating the occurrence of falling 

events, ensuring personal safety. In Europe and the United States, most of the architectural glass 

are used laminated glass, which not only to avoid injury accidents, but also because the laminated 

glass has excellent seismic invasion capability. The middle film can resist the hammer, chopper and 

other weapons of the continuous attack, but also for a long time to resist the penetration of bullets,

 the degree of security can be described as extremely high. Modern living room, sound insulation is

 good, has become one of the important factors to measure the quality of housing. 



 4, sandblasted glass sandblasting glass with high-tech process so that the surface of the glass 

surface erosion, resulting in a translucent matte effect, with a hazy beauty. In the decoration of the 

room, sandblasted glass can be used to express the definition of the area but not closed each other,

 such as between the restaurant and living room, sandblasted glass can be made with a beautiful 

screen.



5, painted glass Stained glass is the home decoration in the use of a more decorative glass. 

In the production, first with a special plastic to draw a variety of patterns, and then use the lead oil 

to describe the separation line, and finally with a special colloidal pigment on the pattern coloring. 

Stained glass pattern rich and beautiful, the bedroom in the appropriate use of stained glass, can be 

more comfortable to create a pleasant atmosphere of harmony, add romantic charming modern 

atmosphere.



 6 carved glass carved glass is divided into two kinds of artificial carving and computer carving. 

One of the artificial sculpture using the skill of the depth of the knife and the transition with the

 better to show the texture of the glass, so that the drawings to the people ready to feel. Engraving

 glass is a decoration in the home is a taste of a decorative glass, the drawings are generally have a

 personality "creative", reflecting the owner of the room where the fun and the pursuit.


 7, inlaid glass mosaic glass can reflect the changes in home space, decorative glass is a random one.

 It can be colored pattern of glass, matte hazy glass, clear and clear any combination of glass, 

and then to separate the metal wire, with a reasonable "creative", showing a different beauty,

 more intoxicated.


8, as the floating glass as floating glass is a new high-tech products, decorative glass in the static 

and no dynamic aspects of a big breakthrough. As the name implies, it is in the absence of any 

external force, the pattern of its own color with the observer's perspective changes in the fluttering, 

that is, with the line of sight to bring the changes in the glass pattern changes, color changes, the

 formation of a unique As the effect of floating, so that the room added a mysterious dynamic.



9, glass tiles, glass tiles style transparent glass tiles, matte glass tiles, lines, several kinds of glass tiles,

 different types of glass tiles, the degree of light refraction will be different. There are a variety of 

glass tiles available. The purity of the glass is to affect the color of the whole brick, the higher the 

purity of the glass tiles, the relative price will be higher. There is no stained transparent glass tiles, 

if the purity is not enough, the glass tiles will be green, the lack of natural sense of transparency.

 Hollow glass tiles to burn the way to two pieces of glass glued together, and then white glue and

 cement will be close to the gap, according to the size of glass tiles, size, pattern, color to do different

design performance. According to the size of the changes can be designed at home, straight wall, 

curved wall and non-continuous wall of the glass wall. It is noteworthy that, in a large area of brick or 

curved construction methods, need to pull copper tendons to maintain the level of brick, and small

 area of brick construction, the need for each glass tiles connected to the corner of the special fixed 

frame construction. Artistic art glass is the art of integration with the overall environment, in addition 

to excellent translucent, the handmade uniqueness and color change is also the decoration of the 

home space decorated with wonderful pen. In the wall, door decoration, light wall, a lot of lights in 

the design can change a new, its material is different from the general metal or other materials 

made of ornaments, detailed manual and gentle performance of the light, Is sunny gentleman.

 But because of the higher unit price, the application can be mixed with other decorative materials 

as a decoration, to create a good lighting changes.




 10, low-emission glass low-emission glass, also known as low-e (floor by) glass, is a member of the 

coating glass family, this glass can reduce the indoor and outdoor temperature caused by heat

transfer. It is a new generation of coated glass that is capable of reflecting the heat of the object, 

like the infrared glass, as well as infrared light, as is the same as the float glass. In any climate 

environment can be used to control the sun, saving energy, heat control and improve the 

environment. The line also known as the constant temperature glass: that is, regardless of the

 indoor and outdoor temperature difference, as long as the installation of low-radiation glass, 

indoor flowers rarely air-conditioning costs will be able to maintain the situation in winter and

 cool summer. However, it should be noted that, in addition to low-impact glass, the impact of 

glass ultraviolet light, shading coefficient, but also from a certain point of view will be small 

 different colors appear in the glass reflective surface.